行业新闻
当前您的位置:网站首页 > 行业新闻

生料带缠绕误区介绍


发布时间:2019-12-11    编辑:杭州恩立氟塑料制品有限公司    浏览次数:678次    标签:

 生料带并不是缠绕的越多密封才好,生料带缠多少圈需要根据螺纹间隙配合而定。在缠好生料带后,也需要注意拧紧的力度。根据师傅反馈,先用手拧紧螺纹配件,然后再用管钳拧进0.5-2圈即可。而需要缠多少圈和拧的力度,那就要根据管道的标准了。

缠绕完成后直接用手撕断即可,这时,我们再将丝扣管件或者螺母拧紧即可,现在厂家生产的生料带已经在使用上非常的方便了。
生料带是用来密封管道连接处,使管道的密封性更好,有时候还会用于水暖安装工程。但很多时候,大家都会说到,缠了十几圈生料带的水龙头,为何还漏水。大部分原因是因为生料带的缠法弄错了,
分析:
一:生料带需要顺着螺纹方向缠绕,缠反了密封性能大大下降;
二:千万不要把所有螺纹都缠上生料带,除了避免生料带进入管道,也会降低密封性能。建议从螺纹始端的第二个丝牙开始缠绕,把第一个丝牙留出来;
三:缠绕生料带时需要稍微用力,保证生料带不被拉断的情况下缠绕,这种方式缠出来的生料带才够紧致牢固,确保密封性。
Raw material tape is not wrapped more sealed before good, raw material tape wrapped how many rings need to be in accordance with the thread clearance. After wrapping the raw material belt, also needs to pay attention to the tightening strength. According to the feedback from the master, first tighten the thread fittings by hand, and then use the pipe pliers to screw in 0.5-2 turns. And the amount of twisting and twisting required, it depends on the standards of the pipe. After winding, we can tear it by hand. At this time, we can tighten the screw fitting or nut. Now the raw material belt produced by the factory is very convenient to use. Raw material tape is used to seal pipe joints, so that the pipeline is better sealed, sometimes also used in plumbing installation works. But a lot of times, everyone will say, wrapped in a dozen rings of raw material Belt Faucet, why leak. Most of the reasons are due to the wrong way of winding the raw material belt. Analysis: First, the raw material belt needs to be wound in the direction of the thread, and the sealing performance is greatly reduced if it is wound in the opposite direction In addition to avoiding the raw material into the pipeline, will also reduce the sealing performance. It is recommended that the first filament be left out by winding the second filament at the beginning of the thread. 3: The raw material belt needs to be wound with a little force to ensure that the raw material belt is not broken This way the raw material wrapped out of the belt is tight and strong enough to ensure sealing.

上一篇:有油生料带与无油生料带有什么区别      下一篇:生料带的耐温性能